1L; BOXOL 26 hydrauliikkaöljy ORLEN OIL

9,10€
Toimitusaikaa kotiin 3-4tp
Lisää ostoskoriin
ID-numero: 85677
Koodi: BOXOL 26 1L
Brändi: ORLEN
https://i.ak24.ee/mf/medium/orlen.jpg
ISO VG : 46
käyttö:
• vaikeissa olosuhteissa toimivat hydraulijärjestelmät
• ajoneuvojen ohjaustehostinlaitteet;
• hydromekaaninen voimansiirto;
• mekaaninen voimansiirto;
• muutamat hydrokineettiset järjestelmät.
characteristic
Oil Boxol® 26 is obtained based on mineral oil and additive package, which sisältää additions increasing viscosity-temperature, lubricants, anti-foaming, anti-inflammatory and antioxidant.
The name of a digital index of oil is the value of the kinematic viscosity at 50 ° C.
Applications
Oil Boxol® 26 shall apply to:
• hydraulic systems operating under severe conditions
• mechanisms supporting the steering in automobiles,
• hydromechanical transmission,
• mechanical transmission,
• Some hydrokinetic systems.
Physico-chemical parameters
One of the parameters. The typical
Kinematic viscosity at 400C mm2 / s 42.1
Viscosity index - 150
Pour -42 0C
Foam control in the study - the foam volume after 5 minutes by blowing air at 25 0C 10 ml
Foam control in the study - the foam volume after 5 minutes by blowing air at 95 0C mL of 80
Foam control in the study - the foam volume after 5 minutes by blowing air at 25 0C after the testin at 95 0C 10 ml
Foam control in the study - the foam volume after 10 min. stand at 25 0C ml 0
Foam control in the study - the foam volume after 10 min. stand at 95 0C ml 0
Foam control in the study - the foam volume after 10 min. stand at 25 0C after the testin at 95 0C ml 0
Operation of copper strip corrosion, 3h / 150 ° C, the corrosion rate patterns 1a
Aniline point of 85 ° C
Lubricating film strength, welding load 198 daN
Density at 20 ° C g / cm3 0.865
NOTE: The above values of physico-chemical parameters are typical values. The actual values are placed on the certificates of quality attached to each batch of product