korjaussarja 250g

For bridge bigger reikää, perforations from corrosion and damages in metal, wood, concrete etc. Especially applicable in mould and model building, in the garden (spray-fiber manufactured ponds) and in other industrial sectors. Can be used e.g. for leaking conductions and ductwork, tanks, boats etc. Chamaeleon Reparatur Box contains unsaturated, elastified polyester resin, hardener as well as glassfibre fabric.
 Ease of Työn  High elasticity  Very good adhesion  Easy to sand, even after longer period  Resistant to weak acids and bases, propellants, solvents, water and de-icing salt

Application: Before use, carefully read and observe the warning texts on the label!  The object you wish to repair should be de-rusted, clean, dry, fat-free and sanded.  Cut the glassfibre tissue depending on size of damaged area, calculate a sufficient overlapping.  Take the requested portion of putty compound out of the can and mix it well with the corresponding Määrä of hardener, then go on as following:  Brush some resin on the prepared surface and put the fibreglass materiaali on this spot.  puristin it with the help of a brush evenly onto the repair spot, starting at the edge, then soak it again with polyester resin. The glassfibre may have no air inclusions.  As last layer you should apply and soak glassfibre fabric as a suitable coat for subsequent repair work. It is possible to proceed with several layers.  If you wish to lacquer the surface, we recommend to go on with Universal medium-grained Polyeatre Putty or Fine-grained Polyester Finishing Putty. The surface of the polyester resin remains sticky and thus works as optimal adhesion promoter. If desired, you can wash off this sticky surface with nitro thinner.  Clean tools immediately after use, if necessary with a nitro thinner.  Do not return mixed materiaali into the can.  After approx. 20-30 minutes the repaired spot can be drilled, sanded, sawed, rasped and painted. Environment and label