Antigeel -31C 5L / LIQUI MOLY
85,80€
Toimitusaikaa kotiin 8-10tp
Lisää ostoskoriin
For all diesel moottorit with and without diesel particulate suodatin or SCR system, especially suited for dealing with problems. Tested for compatibility with turbochargers. Ideal effect only through addition to the fuel tank before the diesel has gelled (at 0 °C). Completely compatible with all conventional diesel fuels and fuel oil with organic content of max. 20 %. 1 l is sufficient for 1,000 l fuel (dosage 1:1,000). Note: Frost sensitive; therefore store above 0 °C!
For optimum effect in preventing paraffin separation, it is necessary to add the flow improver approx. 5 °C above the cloud point (turbidity point). Clusters of paraffin crystals which have already formed in the tank cannot be broken up by adding Diesel Flow Fit K afterwards.
Note: Thoroughly shake the can before use. If possible, store protected against frost. In event of being affected by frost, allow to lämmin to room temperature and shake the can thoroughly before use.
Vehicle tanks:
To improve mixing with the fuel or heating oil Diesel, add Diesel Flow Fit K before filling the tank. Stationary tank plants: The following methods of mixing have been proved to be effective:
1. Add Diesel Flow Fit K when the tank is approx. ¼ full. Topping up the tank will provide sufficient mixing.
2. During subsequent additions to the tank, mix using a stirrer.
For optimum effect in preventing paraffin separation, it is necessary to add the flow improver approx. 5 °C above the cloud point (turbidity point). Clusters of paraffin crystals which have already formed in the tank cannot be broken up by adding Diesel Flow Fit K afterwards.
Note: Thoroughly shake the can before use. If possible, store protected against frost. In event of being affected by frost, allow to lämmin to room temperature and shake the can thoroughly before use.
Vehicle tanks:
To improve mixing with the fuel or heating oil Diesel, add Diesel Flow Fit K before filling the tank. Stationary tank plants: The following methods of mixing have been proved to be effective:
1. Add Diesel Flow Fit K when the tank is approx. ¼ full. Topping up the tank will provide sufficient mixing.
2. During subsequent additions to the tank, mix using a stirrer.
35,50€
46,50€
-24%
Lisää ostoskoriin
Toimitusaikaa kotiin 3-4tp
9,30€
11,50€
-20%
Lisää ostoskoriin
Toimitusaikaa kotiin 3-4tp
8,20€
9,90€
-18%
Lisää ostoskoriin
Toimitusaikaa kotiin 3-4tp
2,20€
Lisää ostoskoriin
Toimitusaikaa kotiin 3-4tp
7,70€
10,10€
-24%
Lisää ostoskoriin
Toimitusaikaa kotiin 3-4tp
6,90€
Lisää ostoskoriin
Toimitusaikaa kotiin 3-4tp
19,30€
24,00€
-20%
Lisää ostoskoriin
Toimitusaikaa kotiin 3-4tp
2,30€
Lisää ostoskoriin
Toimitusaikaa kotiin 3-4tp
21,60€
22,90€
-6%
Lisää ostoskoriin
Toimitusaikaa kotiin 3-4tp