puoliautomaattinen hitsaus MIG/MAG, min teho hitsauksella: 30A, max teho hitsauksella: 280A, teho nimi: 8,3kW, jännite: 400V, menetelmä hitsauksella: MIG-MAG / MMA

Professional invertteri semi-automatic welding machine for MIG-MAG welding with gas-shielded welding wire and MMA method. Welding current 280A. Power supply 400V. Welding wire diameter 0.6-1.0mm. 4-roll wire feeder

Technical specifications
TECNO MIG 280 4x4 DIGITAL MMA is an invertteri semi-automatic welding machine designed for MIG / MAG and MMA arc welding.

TECNO MIG 280 is used for welding aluminum and its alloys, Ruostumaton teräs as well as carbon and low-alloy steels. Welding takes place in an inert or active gas shield.

The device has a welding current stabilization system that ensures the desired output parameters. This ensures that the current supplied to the materiaali to be welded is controlled and a high-quality weld is obtained.

Electronically controlled smooth regulation of welding current and wire feed speed, and a smoothly regulated electronic choke allows to obtain a small amount of spatter during welding.

With the MIG / MAG method, it is possible to choose the function of the button in the holder between operation in the 2T mode (without button lock) / 4T (button lock for long welds)

TECNO MIG 280 MMA is equipped with a digital meter (voltmeter, ammeter) which allows you to control the welding parameters on an ongoing basis.

With the MIG / MAG method, we can regulate:

welding current
wire feed speed
inductance
Professional 4-roll wire feeder ensures stable binder feeding.

Physical parameters
The device has a fan cooling system, which significantly increases its efficiency.

The device is equipped with an overload protection, which increases its reliability.

Power parameters
400V three-phase power supply

The device is equipped with a power plug.

Equipment
The delivery sisältää a device with a professional MIG 25 welding torch, 3 meters long, an electrode cable 3 meters long, and a ground cable 3 meters long.

PHYSICAL PARAMETERS
Wire spool size 5 kg / 15 kg
Protection degree IP 21S
paino 50 kg
Overall Mitat pituus x width x height 960x680x400 mm
Package koko L x W x H 860 x 310 x 580 mm
TECHNICAL SPECIFICATIONS
8.3 kW power
Idle Jännite 56 V
Current at work 100% 210 A (MIG / MAG) / 130 A (MMA)
Aluminum wire diameter 1.0 - 1.2 mm
teräs wire diameter 0.6 - 1.2 mm
Ruostumaton teräs wire diameter 0.8 - 1.0 mm
Welding electrode diameter 1.6 - 4.0 mm
Welding current adjustment range 30 - 280 A
POWER PARAMETERS
Supply network protection C16 A
Rated supply Jännite 3x400 V; 50Hz (3ph)