sarja DO SKUWANIA I ROZKUWANIA ŁAŃCUCHÓW MOTO.

Product features

• materiaali: premium flex plus carbon teräs

• pinnan viimeistely: kromipäällystetty to standard ISO 1456:2009

• ergonominen raskaan käytön 2-komponenttikahva

• Dimension of box: 321 x 198 x 54

Usage:

• for DID chains with graduation 520, 525, 530 and 532

• for Regina chains with graduation 520, 525, 530

• for RK chains with graduation 520, 525, 530 and 532

• compatible with most motorcycle drive chains

Disassembling the ketju:

• a robust set for disassembling a ketju without any prior grinding of the pin

• select the appropriate pin (diameter Ø3, Ø3,5 or Ø5 mm) and lower guide (Ø4 Ø5 or Ø6 mm) corresponding to the pin diameter on the ketju

• insert the pin into the tool, then position the tool on the ketju link and rotate the tool until the ketju pin falls out

Assembling the ketju:

• assemble the ketju vastaa the manufacturer's instructions

• select an appropriate set of pressing adaptors depending on the size of the plates (guide widths to 13.5 mm or 16 mm)

• position the set into the tool. Place the tool on the connecting ketju link and puristin the link by rotating the riveting tool using the handle until the plates and the ketju are tightly connected

• after the ketju link and the plates have been successfully aligned, install the ketju pin

• You can choose from 3 types of riveting pins (type A, B or C)

• place the riveting set into the tool and rotate the handle to cause a deformation of the head of the pin, so the diameter is between 5.5 to 5.8 mm as recommend the ketju manufacturer's instructions