kierrepakka
Edellinen 1 2 3 ... 9 10 11 12 Seuraava
saatavana 1kpl.
46,60€
Lisää ostoskoriin
saatavana 1kpl.
46,90€
49,90€
-7%
Lisää ostoskoriin
for thorugh threads, right-handed, pituus: total 84mm - drill 12mm - thread 18mm, drill ø5.0mm, 2 flutes, 30° spiral flute, syvyys 1.5xD, 4-point shank ø5.0x8.0mm HSS ISO, tolerance 6H M6x1.00
47,60€
55,80€
-15%
Lisää ostoskoriin
kierretappisarja M20 HSS, sisäkierteen leikkaamiseen, pakkauksessa 3kpl. Lisainfot tuotteen kohta Saat lukea tässä.
47,80€
Lisää ostoskoriin
saatavana 1kpl.
48,00€
51,00€
-6%
Lisää ostoskoriin
saatavana 2kpl.
48,00€
51,00€
-6%
Lisää ostoskoriin
saatavana 2kpl.
48,00€
51,00€
-6%
Lisää ostoskoriin
saatavana 2kpl.
48,10€
51,10€
-6%
Lisää ostoskoriin
saatavana 1kpl.
48,20€
Lisää ostoskoriin
saatavana 1kpl.
48,20€
Lisää ostoskoriin
saatavana 2kpl.
48,30€
51,30€
-6%
Lisää ostoskoriin
pituus: 20/110mm, for bottoming, overflow shank, C: 35° right-hand spiral flutes, 2-3 threads chamfer, DIN ISO 13, thread angle 60°, thread core hole ø14mm, tolerance ISO2 6H HSSE Co5 VAP DIN371, ground, cobalt alloyed (5%) and vaporised heavy-duty high-speed teräs, max. 1000N/mm², thread is cut in one operation, vaporisation: evaporation of a non-metallic oxide film, acts as a separating layer an...
49,40€
57,90€
-15%
Lisää ostoskoriin
kierteen puhdistuksen/kunnostukseen pora M10x1.0 mm. Triumf Professional Tools on kansainvälisesti toimiva yritys Slovakiassa. Perustamisestaan vuonna 1999 lähtien yritys on tarjonnut asiakkaille laadukkaita käsityökaluja, sähkö- ja paineilmatyökaluja, erikoistyökaluja ja ajoitustyökaluja moottori-, vaihteisto-, jarru-, diesel- ja akselitöihin. Lisäksi paljon muuta auton huoltoon ja korjaukseen ...
50,20€
Lisää ostoskoriin
pituus: 16/100mm, 35° right hand spiral flutes for bottoming, G: cylindrical pipe thread DIN228, Rp: Whitworth pipe thread DIN2999, thread angle 60°, 11 threads/tuumaa, overflow shank, core hole ø15.25mm HSSE Co5 DIN5156, ground, high speed teräs w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for teräs 1000N/mm², Ruostumaton teräs and brass, a...
50,30€
58,90€
-15%
Lisää ostoskoriin
3pc set: taper tap (6-8 thread chamfer) - second tap (4-5 thread chamfer) - final tap (2-3 thread chamfer), pituus: 30/80mm, thread angle 60°, core hole ø12.0mm, tolerance ISO2 6H HSS DIN352, ground, high speed teräs, max 800N/mm² M14x2.0
52,00€
61,00€
-15%
Lisää ostoskoriin
pituus: 16/100mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø13mm HSSE Co5 DIN374, ground, high speed teräs w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for teräs 1000N/mm², Ruostumaton teräs and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6H ...
54,70€
64,10€
-15%
Lisää ostoskoriin
pituus: 16/100mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø12.8mm HSSE Co5 DIN374, ground, high speed teräs w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for teräs 1000N/mm², Ruostumaton teräs and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6...
54,70€
64,10€
-15%
Lisää ostoskoriin
pituus: 25/140mm, for bottoming, overflow shank, C: 35° right-hand spiral flutes, 2-3 threads chamfer, DIN ISO 13, thread angle 60°, thread core hole ø17.5mm, tolerance ISO2 6H HSSE Co5 VAP DIN371, ground, cobalt alloyed (5%) and vaporised heavy-duty high-speed teräs, max. 1000N/mm², thread is cut in one operation, vaporisation: evaporation of a non-metallic oxide film, acts as a separating layer ...
54,80€
66,20€
-18%
Lisää ostoskoriin
for thorugh threads, right-handed, pituus: total 96mm - drill 16mm - thread 21mm, drill ø6.8mm, 2 flutes, 30° spiral flute, syvyys 1.5xD, 4-point shank ø6.3x11.0mm HSS ISO, tolerance 6H M8x1.25
58,30€
70,30€
-18%
Lisää ostoskoriin
saatavana 1kpl. DIN 352Tolerance vastaa ISO 2 / 6HRight hand cuttingsisältää second and bottom tapFor running and blind hole threadsWith hard metal centre Surface without discolourationHigh performance high speed teräsIdeally usably in high and low alloyed teräs up to 800 N/mm² stability, cast iron and NE metals. tekniset tiedotindividual second tap: 331.0336individual bottom tap: 331.0356individual taper tap: 33...
58,70€
Lisää ostoskoriin
pituus: 36/160mm, for through threads, DIN ISO 13, thread angle 60°, B: 4-5 threads chamfer, overflow shank, progressive tap, thread core hole ø21mm, tolerance ISO2 6H HSSE Co5 DIN371, ground, high speed teräs with 5% cobalt content, max. 1000N/mm² M24x3.0
59,20€
76,50€
-23%
Lisää ostoskoriin
pituus: 22/140mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø22mm HSSE Co5 DIN374, ground, high speed teräs w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for teräs 1000N/mm², Ruostumaton teräs and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6H ...
59,20€
76,50€
-23%
Lisää ostoskoriin
G1/4"x19, pituus: 15/100mm, for blind reikää spiral flute 45°,max syvyys 2.5 x ø, C chamfer: 2-3 teeth, DIN 5156HSS-E PMHSS-E PM: powder metallurgy teräs, steam temperedG1/4"x19
59,20€
76,50€
-23%
Lisää ostoskoriin
3pc set: taper tap (6-8 thread chamfer) - second tap (4-5 thread chamfer) - final tap (2-3 thread chamfer), pituus: 32/80mm, thread angle 60°, core hole ø14.0mm, tolerance ISO2 6H HSS DIN352, ground, high speed teräs, max 800N/mm² M16x2.0
60,00€
72,40€
-18%
Lisää ostoskoriin
pituus: 30/140mm, for through threads, DIN ISO 13, thread angle 60°, B: 4-5 threads chamfer, overflow shank, progressive tap, thread core hole ø17.5mm, tolerance ISO2 6H HSSE Co5 VAP DIN371, ground, cobalt alloyed (5%) and vaporised heavy-duty high-speed teräs, max. 1000N/mm², thread is cut in one operation, vaporisation: evaporation of a non-metallic oxide film, acts as a separating layer and red...
60,00€
72,40€
-18%
Lisää ostoskoriin
G3/8"x19, pituus: 15/100mm, for blind reikää spiral flute 45°,max syvyys 2.5 x ø, C chamfer: 2-3 teeth, DIN 5156HSS-E PMHSS-E PM: powder metallurgy teräs, steam temperedG3/8"x19
60,80€
78,60€
-23%
Lisää ostoskoriin
saatavana 2kpl. DIN 352Tolerance vastaa ISO 2 / 6HRight hand cuttingsisältää second and bottom tapFor running and blind hole threadsWith hard metal centre Surface without discolourationHigh performance high speed teräsIdeally usably in high and low alloyed teräs up to 800 N/mm² stability, cast iron and NE metals. tekniset tiedotindividual second tap: 331.0335individual bottom tap: 331.0355individual taper tap: 33...
61,20€
Lisää ostoskoriin
pituus: 25/140mm, for bottoming, overflow shank, C: 35° right-hand spiral flutes, 2-3 threads chamfer, DIN ISO 13, thread angle 60°, thread core hole ø17.5mm, tolerance ISO2 6H HSSE Co5 DIN371, ground, high speed teräs with 5% cobalt content, max. 1000N/mm² M20x2.5
61,70€
74,40€
-18%
Lisää ostoskoriin
pituus: 16/100mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø14.5mm HSSE Co5 DIN374, ground, high speed teräs w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for teräs 1000N/mm², Ruostumaton teräs and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6...
61,70€
74,40€
-18%
Lisää ostoskoriin
pituus: 16/100mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø15mm HSSE Co5 DIN374, ground, high speed teräs w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for teräs 1000N/mm², Ruostumaton teräs and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6H ...
61,70€
74,40€
-18%
Lisää ostoskoriin