kierrepakka
Edellinen 1 2 3 ... 8 9 10 11 12 Seuraava
saatavana 2kpl. materiaali2: ruostumaton materiaali1: erikoisteräs kierretappiversio: leikkauskierretappi paino g: 67 pakkauksen korkeus mm: 16 pakkauksen leveys mm: 19 pakkauksen pituus mm: 121 Kaikki KS TOOLS -työkalut valmistetaan Saksassa. KS TOOLS Werkzeuge - Maschinen GmbH on yksi johtavista työkalujen ja teollisuustuotteiden valmistajista. Yritys on perustettu vuonna 1992 ja sen pääkonttori sijaitsee Heus...
36,00€
Lisää ostoskoriin
3pc set: taper tap (6-8 thread chamfer) - second tap (4-5 thread chamfer) - final tap (2-3 thread chamfer), pituus: 24/70mm, thread angle 60°, core hole ø8.5mm, tolerance ISO2 6H HSS DIN352, ground, high speed teräs, max 800N/mm² M10x1.5
36,00€
40,30€
-11%
Lisää ostoskoriin
pituus: 15/100mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø8.8mm HSSE Co5 DIN374, ground, high speed teräs w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for teräs 1000N/mm², Ruostumaton teräs and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6H...
36,00€
40,30€
-11%
Lisää ostoskoriin
M10x1.5, pituus: 4/9/45mm, for blind reikää spiral flute 45°, max syvyys 2.5 x ø, C alkuviiste: 2-3 hammasta, DIN 371, toleranssi 6HHSS-E PMHSS-E PM: powder metallurgy teräsM10x1.5
36,00€
40,30€
-11%
Lisää ostoskoriin
36,50€
38,80€
-6%
Lisää ostoskoriin
saatavana 1kpl.
36,50€
38,80€
-6%
Lisää ostoskoriin
saatavana 1kpl. DIN 2181Tolerance vastaa ISO 2 / 6HRight hand cuttingsisältää for cutting and threadingFor running and blind hole threadsWith hard metal centreSurface without discolourationHigh performance high speed teräsIdeally usably in high and low alloyed teräs up to 800 N/mm² stability, cast iron and NE metals. tekniset tiedotapplication materiaali: teräs, cast ja muottitaottu iron snd NE metalsindividual b...
37,40€
Lisää ostoskoriin
saatavana 1kpl. DIN 2181Tolerance vastaa ISO 2 / 6HRight hand cuttingsisältää for cutting and threadingFor running and blind hole threadsWith hard metal centreSurface without discolourationHigh performance high speed teräsIdeally usably in high and low alloyed teräs up to 800 N/mm² stability, cast iron and NE metals. tekniset tiedotapplication materiaali: teräs, cast ja muottitaottu iron snd NE metalsindividual b...
37,40€
Lisää ostoskoriin
kierteen nousu (Pitch/P) 1,75 kokonaispituus (L) 89 teräosan pituus (l) 16COATING_TREATEMENTSteam treatedDIAMETER_MM1.75LENGTH_ATTRIBUTEStandardmateriaaliHSSSHANKSquare
37,50€
Lisää ostoskoriin
pituus: 25/110mm, for through threads, DIN ISO 13, thread angle 60°, B: 4-5 threads chamfer, progressive tap, reinforced shank, thread core hole ø14mm, tolerance ISO2 6H HSSE Co5 DIN371, ground, high speed teräs with 5% cobalt content, max. 1000N/mm² M16x2.0
37,90€
42,40€
-11%
Lisää ostoskoriin
saatavana 1kpl. vaihe (mm) 2,50mm aukon halkaisija 19,5mm kokonaispituus (mm) 140mm
38,70€
Lisää ostoskoriin
pituus: 20/110mm, for bottoming, overflow shank, C: 35° right-hand spiral flutes, 2-3 threads chamfer, DIN ISO 13, thread angle 60°, thread core hole ø14mm, tolerance ISO2 6H HSSE Co5 DIN371, ground, high speed teräs with 5% cobalt content, max. 1000N/mm² M16x2.0
38,80€
45,50€
-15%
Lisää ostoskoriin
pituus: 25/110mm, for through threads, DIN ISO 13, thread angle 60°, B: 4-5 threads chamfer, progressive tap, overflow shank, thread core hole ø14mm, tolerance ISO2 6H HSSE Co5 VAP DIN371, ground, cobalt alloyed (5%) and vaporised heavy-duty high-speed teräs, max. 1000N/mm², thread is cut in one operation, vaporisation: evaporation of a non-metallic oxide film, acts as a separating layer and reduc...
38,80€
45,50€
-15%
Lisää ostoskoriin
3pc set: taper tap (6-8 thread chamfer) - second tap (4-5 thread chamfer) - final tap (2-3 thread chamfer), pituus: 29/75mm, thread angle 60°, core hole ø10.2mm, tolerance ISO2 6H HSS DIN352, ground, high speed teräs, max 800N/mm² M12x1.75
39,70€
46,50€
-15%
Lisää ostoskoriin
pituus: 16/100mm, 35° right hand spiral flutes for bottoming, G: cylindrical pipe thread DIN228, Rp: Whitworth pipe thread DIN2999, thread angle 60°, 11 threads/tuumaa, overflow shank, core hole ø11.80mm HSSE Co5 DIN5156, ground, high speed teräs w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for teräs 1000N/mm², Ruostumaton teräs and brass, a...
39,70€
46,50€
-15%
Lisää ostoskoriin
G1/8"x28, pituus: 13/90mm, for blind reikää spiral flute 45°,max syvyys 2.5 x ø, C chamfer: 2-3 teeth, DIN 5156HSS-E PMHSS-E PM: powder metallurgy teräs, steam temperedG1/8"x28
39,70€
46,50€
-15%
Lisää ostoskoriin
40,50€
43,10€
-7%
Lisää ostoskoriin
saatavana 2kpl.
40,70€
43,30€
-7%
Lisää ostoskoriin
saatavana 2kpl.
40,70€
43,30€
-7%
Lisää ostoskoriin
saatavana 2kpl. DIN 352Tolerance vastaa ISO 2 / 6HRight hand cuttingsisältää second and bottom tapFor running and blind hole threadsWith hard metal centre Surface without discolourationHigh performance high speed teräsIdeally usably in high and low alloyed teräs up to 800 N/mm² stability, cast iron and NE metals. tekniset tiedotindividual second tap: 331.0332individual bottom tap: 331.0352individual taper tap: 33...
41,10€
Lisää ostoskoriin
saatavana 2kpl. kierteen koko: M18 x 1,5 kokonaispituus L mm: 50 kierretappiversio: leikkauskierretappi paino g: 75 pakkauksen korkeus mm: 24 pakkauksen leveys mm: 28 pakkauksen pituus mm: 61 Kaikki KS TOOLS -työkalut valmistetaan Saksassa. KS TOOLS Werkzeuge - Maschinen GmbH on yksi johtavista työkalujen ja teollisuustuotteiden valmistajista. Yritys on perustettu vuonna 1992 ja sen pääkonttori sijaitsee Heusens...
41,90€
Lisää ostoskoriin
saatavana 2kpl. kierteen koko: M20 x 1,5 kokonaispituus L mm: 50 kierretappiversio: leikkauskierretappi paino g: 77 pakkauksen korkeus mm: 20 pakkauksen leveys mm: 34 pakkauksen pituus mm: 48 Kaikki KS TOOLS -työkalut valmistetaan Saksassa. KS TOOLS Werkzeuge - Maschinen GmbH on yksi johtavista työkalujen ja teollisuustuotteiden valmistajista. Yritys on perustettu vuonna 1992 ja sen pääkonttori sijaitsee Heusens...
42,80€
Lisää ostoskoriin
saatavana 2kpl. DIN 352Tolerance vastaa ISO 2 / 6HRight hand cuttingsisältää second and bottom tapFor running and blind hole threadsWith hard metal centre Surface without discolourationHigh performance high speed teräsIdeally usably in high and low alloyed teräs up to 800 N/mm² stability, cast iron and NE metals. tekniset tiedotindividual second tap: 331.0334individual bottom tap: 331.0354individual taper tap: 33...
42,90€
Lisää ostoskoriin
saatavana 1kpl. DIN 2181Tolerance vastaa ISO 2 / 6HRight hand cuttingsisältää for cutting and threadingFor running and blind hole threadsWith hard metal centreSurface without discolourationHigh performance high speed teräsIdeally usably in high and low alloyed teräs up to 800 N/mm² stability, cast iron and NE metals. tekniset tiedotapplication materiaali: teräs, cast ja muottitaottu iron snd NE metalsindividual b...
42,90€
Lisää ostoskoriin
for thorugh threads, right-handed, pituus: total 56mm - drill 6mm - thread 10mm, drill ø2.5mm, 2 flutes, 30° spiral flute, syvyys 1.5xD, 4-point shank ø2.5x5.0mm HSS ISO, tolerance 6H M3x0.50
43,20€
50,70€
-15%
Lisää ostoskoriin
pituus: 14/100mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø10.8mm HSSE Co5 DIN374, ground, high speed teräs w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for teräs 1000N/mm², Ruostumaton teräs and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6...
44,10€
51,70€
-15%
Lisää ostoskoriin
pituus: 14/100mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø11mm HSSE Co5 DIN374, ground, high speed teräs w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for teräs 1000N/mm², Ruostumaton teräs and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6H ...
44,10€
51,70€
-15%
Lisää ostoskoriin
saatavana 1kpl. 35 ̊nurk
44,60€
47,40€
-6%
Lisää ostoskoriin
pituus: 14/100mm, 35° right hand spiral flutes for bottoming, fine thread DIN ISO13, thread angle 60°, overflow shank, core hole ø10.5mm HSSE Co5 DIN374, ground, high speed teräs w. 5% cobalt content, higher stressing capacity and high heat resistant: longer tool life, especially for teräs 1000N/mm², Ruostumaton teräs and brass, also for cast iron, aluminium, plastics and bronze, tolerance: ISO2 6...
45,00€
52,70€
-15%
Lisää ostoskoriin
for thorugh threads, right-handed, pituus: total 65mm - drill 8mm - thread 12mm, drill ø3.3mm, 2 flutes, 30° spiral flute, syvyys 1.5xD, 4-point shank ø3.15x6.0mm HSS ISO, tolerance 6H M4x0.70
45,00€
52,70€
-15%
Lisää ostoskoriin